SECTION 501-14: Handles, Locks, Latches and Entry Systems
2014 Mustang Workshop Manual
GENERAL PROCEDURES
Procedure revision date: 01/07/2013

Latch Lubrication


Material
Item Specification
Multi-Purpose Grease
Motorcraft® XL-5 (aerosol) and/or CRC® SL3151 		ESB-M1C93-B
  1. Open the door.
  1. Using a screwdriver, fully close the latch (2 clicks).
  1. Spray the multi-purpose grease into the opening on the door latch for approximately 5 seconds.
  1. Open the latch using either the interior or exterior door handle.
  1. Open and close the door several times to circulate the lubricant inside the latch.
  1. Wipe off any excess grease.