SECTION 501-16: Wipers and Washers
2014 Mustang Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 01/07/2013
Wiper Mounting Arm and Pivot Shaft
Removal and Installation
Remove the RH and LH cowl vent screens. For additional information, refer to
Section 501-02
.
Remove the 3 bolts and the windshield wiper mounting arm and pivot shaft.
To install, tighten to 7 Nm (62 lb-in).
Disconnect the windshield wiper motor electrical connector.
To install, reverse the removal procedure.