SECTION 501-16: Wipers and Washers
2014 Mustang Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 01/07/2013

Wiper Pivot Arm

Removal

  1. Remove the 2 wiper pivot arm nut covers.
  1. Remove the 2 wiper pivot arm nuts.
  1. Using a suitable 2 jaw puller, remove the 2 wiper pivot arms.

Installation

  1. Using a wire brush, clean the wiper pivot arm shaft.
  1. Cycle and park the windshield wipers.

  1. NOTE: New wiper pivot arms need to be installed as an assembly.

    Install the 2 wiper pivot arms to the specified distance.
  1. Install the 2 wiper pivot arm nuts.
  1. Install the 2 wiper pivot arm nut covers.