SECTION 502-00: Uni-Body, Subframe and Mounting System
| 2014 Mustang Workshop Manual
|
SPECIFICATIONS
| Procedure revision date: 01/07/2013
|
Torque Specifications
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Engine mount bracket-to-engine mount nuts | 63 | 46 | — |
| Crossmember brace bolts | 65 | 48 | — |
| Front crossmember brace nuts | 48 | 35 | — |
| Front crossmember nuts | 115 | 85 | — |
| Front subframe bolts (rear) | 115 | 85 | — |
| Front subframe nuts (front) | 115 | 85 | — |
| LH valve cover stud bolt | 10 | — | 89 |
| Lower air deflector bolts | 5 | — | 44 |
| Lower control arm ball joint nuts | 115 | 85 | — |
| Rear support brace bolts (center-to-frame) | 63 | 46 | — |
| Rear support brace bolts (front) | 63 | 46 | — |
| Rear support brace bolts (rear) | 63 | 46 | — |
| Rear support brace bolts (upper) | 25 | 18 | — |
| RH radiator support bracket bolt | 10 | — | 89 |
| Steering column dash boot bearing nuts | 9 | — | 80 |
| Steering shaft pinch bolt | 47 | 35 | — |
| Strut tower cross brace nuts | 35 | 26 | — |
| Tie-rod end nuts | 80 | 59 | — |
| Transmission crossmember bolts | 63 | 46 | — |
| Transmission support insulator bolt, 5.8L (4V) | 70 | 52 | — |
| Transmission support insulator nuts, 3.7L and 5.0L | 70 | 52 | — |