SECTION 303-05: Accessory Drive
2014 Mustang Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 01/07/2013

Accessory Drive Belt Tensioner — 5.0L (4V)

Removal and Installation

  1. Remove the Air Cleaner (ACL) intake tube. For additional information, refer to Section 303-12 .
  1. Rotate the accessory drive belt tensioner counter clockwise and remove the accessory drive belt.
  1. Remove the bolt and the accessory drive belt tensioner.

  1. NOTE: For additional information, refer to Accessory Drive in the Description and Operation portion of this section for correct drive belt routing.

    To install, reverse the removal procedure.