SECTION 303-06: Starting System
| 2014 Mustang Workshop Manual
|
SPECIFICATIONS
| Procedure revision date: 01/07/2013
|
General Specifications
| Item | Specification |
|---|---|
| Maximum starting circuit voltage drop (engine at normal engine temperature) | 0.5 volt |
| Normal engine cranking speed rpm | 100-140 rpm |
| Starter motor no load current draw amperes | 60-80 amps |
| Starter motor normal load current draw | 130 amps |
| Starter motor maximum load current draw amperes | 400 amps |
Torque Specifications
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Starter motor bolts (3.7L) | 48 | 35 | — |
| Starter motor bolts (5.0L (4V) & 5.8L (4V)) | 25 | 18 | — |
| Starter motor solenoid B+ terminal nut | 12 | — | 106 |
| Starter motor solenoid S-terminal nut | 5 | — | 44 |