SECTION 206-00: Brake System — General Information
| 2014 Mustang Workshop Manual
|
SPECIFICATIONS
| Procedure revision date: 01/07/2013
|
| Item | Specification | Fill Capacity |
|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada) | WSS-M6C62-A or WSS-M6C65-A1 | —
— |
General Specifications
| Item | Specification |
|---|---|
| Front Brakes — 2 Piston Calipers | |
| Front brake disc minimum thickness | 28.4 mm (1.118 in) |
| Brake pad minimum thickness | 3.0 mm (0.118 in) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
| Front Brakes— 4 Piston calipers | |
| Front brake disc minimum thickness | 30.0 mm (1.181 in) |
| Front brake pad minimum thickness | 1.8 mm (0.071 in) |
| Front Brakes— 6 Piston calipers | |
| Front brake disc minimum thickness | 29.0 mm (1.141 in) |
| Front brake pad minimum thickness | 7.65 mm (0.301 in) |
| Rear Brakes — All vehicles | |
| Rear brake disc minimum thickness | 17.4 mm (0.685 in) |
| Rear brake pad minimum thickness | 3.0 mm (0.118 in) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
Torque Specifications
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Front brake caliper bleeder screw (2 piston caliper) | 10 | — | 89 |
| Front brake caliper bleeder screw (4 and 6 piston calipers ) | 18 | — | 159 |
| Master cylinder brake tube fittings | 25 | 18 | — |
| Rear brake caliper bleeder screw (all vehicles) | 10 | — | 89 |