SECTION 307-02B: Transmission Cooling — TR6060
2014 Mustang Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 01/07/2013
Transmission Fluid Cooler
Special Tool(s)
Disconnect Tool, Transmission Cooler Line
307-569
Removal
Remove the front bumper cover. Refer to
Section 501-19
.
On both sides.
Installation
On both sides.
Tighten to 9 Nm (80 lb-in).
Install the front bumper cover. Refer to
Section 501-19
.
Tighten to 8 Nm (71 lb-in).
Tighten to 8 Nm (71 lb-in).
Fill the transmission with the correct fluid level.
