SECTION 308-03A: Manual Transaxle/Transmission — MT82 Getrag 6-Speed
2014 Mustang Workshop Manual
SPECIFICATIONS
Procedure revision date: 01/07/2013


Material
Item Specification Fill Capacity
Motorcraft® Gasket Maker
TA-16
WSK-M2G348-A5
Motorcraft® High Performance DOT 3 Motor Vehicle Brake Fluid (US) / Motorcraft® Brake Fluid - Heavy Duty DOT 3 (Canada)
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSS-M6C65-A1
Motorcraft® Dual Clutch Transmission Fluid
XT-11-QDC
WSS-M2C200-D2 2.6L (2.7 qt)
Motorcraft® Premium Long-Life Grease
XG-1-C (US); CXG-1-C (Canada)
ESA-M1C75-B
Motorcraft® Threadlock 262
TA-26
WSK-M2G351-A6
Motorcraft® Threadlock and Sealer
TA-25
WSK-M2G351-A5


  General Specifications

Item Specification
Rotational Torque maximum
Input shaft 1.2 Nm (10.6 lb-in)
Transmission
Physical weight (dry) 56 kg (123.5 lb)



 Gear Ratio Chart

Gear V6 Ratio V8 Ratio
1st/low 4.24:1 3.66:1
2nd 2.54:1 2.43:1
3rd 1.66:1 1.69:1
4th 1.24:1 1.31:1
5th 1:1 1:1
6th 0.70:1 0.65:1
Reverse 3.84:1 3.32:1



  Torque Specifications

Description Nm lb-ft lb-in
Bearing retaining bolts a
Catalytic converter-to-exhaust manifold nuts a
Center support bolts a
Clutch slave cylinder bolts 11 97
Countershaft bolt a
Drain plug 35 26
Driveshaft center bearing bolts 48 35
Driveshaft flange bolts a
Engine spacer plate-to-transmission bolts (5.0L [4V] engines) 35 26
Engine-to-transmission bolts (3.7L engines) 48 35
Exhaust (H-pipe) clamps 48 35
Fill plug 35 26
Gearshift lever nuts 11 97
Gearshift lever-to-transmission bolt 40 30
Gearshift lever bolt 15 133
Interlock plate bolts a
Output shaft flange nut a
OSS sensor bolt 10 89
Reverse idler gear bracket bolt a
Reverse lamp switch 20 177
Shift fork pivot bolts a
Strut tower cross brace nuts 35 26
Subframe cross brace nuts 48 35
Transmission case bolts 24 18
Transmission crossmember bolts 63 46
Transmission support insulator bolts 103 76
Transmission support insulator nuts 70 52
Transmission-to-engine bolts 48 35
Transmission-to-engine stud bolts 48 35
a Refer to procedure in this section