SECTION 308-03A: Manual Transaxle/Transmission — MT82 Getrag 6-Speed
2014 Mustang Workshop Manual
IN-VEHICLE REPAIR
Procedure revision date: 01/07/2013

Output Shaft Speed (OSS) Sensor


Material
Item Specification
Motorcraft® Dual Clutch Transmission Fluid
XT-11-QDC 		WSS-M2C200-D2


Item Part Number Description
1 7H103 Output Shaft Speed (OSS) sensor
2 — OSS sensor electrical connector
3 W714875 OSS sensor bolt

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
  1. Remove the drain plug and drain the transmission fluid.
  1. Disconnect the Output Shaft Speed (OSS) electrical connector.
  1. Remove the OSS sensor bolt, then remove OSS sensor.
  1. To install, reverse the removal procedure.

  1. NOTICE: The use of any other transmission fluid than specified can result in the transmission failing to operate in a normal manner or transmission failure.

    Check, and as necessary, fill the transmission with transmission fluid.