SECTION 211-02: Power Steering
| 2014 Mustang Workshop Manual
|
SPECIFICATIONS
| Procedure revision date: 01/07/2013
|
Torque Specifications
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Crossmember brace nuts | 48 | 35 | — |
| Crossmember brace bolts | 48 | 35 | — |
| Ground strap bolt | 6 | — | 53 |
| Inner tie rod | 120 | 89 | — |
| LH engine mount nut | 63 | 46 | — |
| Lower steering column shaft-to-upper steering column shaft bolt | 25 | 18 | — |
| Rearward subframe crossmember brace nuts | 48 | 35 | — |
| Starter motor solenoid B+ terminal nut | 12 | — | 106 |
| Starter motor solenoid S-terminal nut | 5 | — | 44 |
| Steering column shaft coupling bolts | 25 | 18 | — |
| Steering gear bolts | 115 | 85 | — |
| Strut tower cross brace bolts | 35 | 26 | — |
| Tie-rod end nuts | 80 | 59 | — |
| Tie-rod jam nuts | 55 | 41 | — |
| Transmission cooler tube bracket-to-engine mount nut | 48 | 35 | — |
| Transmission cooler tube bracket-to-transmission nut | 12 | — | 106 |