2014 Mustang Workshop Manual

SECTION 412-00: Climate Control System — General Information and Diagnostics	2014 Mustang Workshop Manual
SPECIFICATIONS	Procedure revision date: 01/07/2013

Material
Item	Specification	Fill Capacity
Motorcraft® A/C Cooling Coil Coating YN-29	—	—
Motorcraft® A/C System Flushing Solvent YN-23	—	—
Motorcraft® PAG Refrigerant Compressor Oil YN-12-D	WSH-M1C231-B	118 ml (4 fl oz)
Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada)	WSH-M17B19-A	0.60 kg (21 oz) (1.31 lb)
Stay-Brite® R-134a Leak Detection Dye 164-R6060 (Rotunda)	—	—

General Specifications

Item	Specification
A/C Compressor Magnetic Clutch
Air gap clearance	0.35-0.60 mm (0.014-0.024 in)
A/C Pressure Relief Valve ^a
Open pressures	3,792-4,137 kPa (550-600 psi)
Evaporator Discharge Air Temperature Sensor
OFF temperature	6°C (43°F)
ON temperature	7.5°C (45.5°F)

^a Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve and the A/C pressure transducer location.

Torque Specifications

Description	Nm	lb-ft	lb-in
A/C compressor bolt	25	18	—