SECTION 413-01: Instrumentation, Message Center, and Warning Chimes
2014 Mustang Workshop Manual
GENERAL PROCEDURES
Procedure revision date: 01/07/2013

Message Center Configuration

 

Performance Shift Indicator, Shift Tone and Shift Point

  1. NOTE: The vehicle must be at a complete stop before configuring the performance shift indicator, shift tone or shift point.

    Press and release the SETUP button until the message center displays PRESS RESET TO SET SHIFTPOINT.
  1. Press the RESET button until the message center displays SHIFTLAMP to toggle the performance shift indicator on or off. Once the performance shift indicator has been selected on or off, press the SETUP BUTTON.
  1. Press the RESET button until the message center displays SHIFTTONE to toggle the shift tone on or off. Once the shift tone has been selected on or off, press the SETUP BUTTON.

  1. NOTE: The shift points can be configured from 1,500-6,000 rpm.

    Press the INFO button to lower the shift points in increments of 100 rpm.
  1. Press the RESET button to raise the shift points in increments of 100 rpm.