SECTION 414-01: Battery, Mounting and Cables
| 2014 Mustang Workshop Manual
|
SPECIFICATIONS
| Procedure revision date: 01/07/2013
|
| Item | Specification | Fill Capacity |
|---|---|---|
| Threadlock and Sealer
TA-25 | WSK-M2G351-A5 | — |
General Specifications
| Item | Specification |
|---|---|
| Battery | |
| Cold Cranking Amps (CCA) measured at
-18°C (0°F) | 590 CCA |
| Voltage | 12 volts |
Torque Specifications
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Battery cable harness bracket bolt | 15 | — | 133 |
| Battery cable harness bracket nuts (5.0L, 5.8L) | 9 | — | 80 |
| Battery cable harness bracket-to-engine block nut (3.7L) | 47 | 35 | — |
| Battery cable harness-to-valve cover bracket nut (3.7L) | 9 | — | 80 |
| Battery cable terminal nut | 10 | — | 89 |
| Battery ground cable body terminal bolt | 10 | — | 89 |
| Battery ground cable-to-engine terminal nut (5.0L, 5.8L) | 47 | 35 | — |
| Battery ground cable-to-head terminal bolt (3.7L) | 12 | — | 106 |
| Battery hold-down clamp bolt | 8 | — | 71 |
| Battery Junction Box (BJB) terminal nut | 10 | — | 89 |
| Battery tray bolts | 11 | — | 97 |
| Generator B+ terminal nut | 17 | — | 150 |
| Lower battery cable harness bracket nut (5.8L) | 8 | — | 71 |
| Starter solenoid positive cable terminal nut | 12 | — | 106 |
| Starter solenoid wire terminal nut | 5 | — | 44 |