Trim - Side - Trunk - RH (Remove and Replace)

Correction code 1524510215245102

Remove

  1. Remove the RH 2nd row seat back. See Seat Back - 2nd Row - RH (Remove and Install).
  2. Remove the RH side trunk carpet clips (x2) from the body studs located under the 2nd row seat cushion.
  3. Raise the trunk carpet over the ISOFIX bars on the RH side.
  4. Remove the trunk sill trim panel. See Trim - Sill - Trunk (Remove and Replace).
  5. Remove the trunk garnish. See Garnish - Trunk (Remove and Replace).
  6. Release the clips that attach the puddle light to the RH trunk side trim, disconnect the electrical harness from the puddle light electrical connector, and then remove the puddle light from the vehicle.
  7. Remove the push clips that attach the RH trunk side trim to the body, and remove the side trim from the vehicle.
1Remove the RH 2nd row seat back. See Seat Back - 2nd Row - RH (Remove and Install).
2Remove the RH side trunk carpet clips (x2) from the body studs located under the 2nd row seat cushion.
3Raise the trunk carpet over the ISOFIX bars on the RH side.
4Remove the trunk sill trim panel. See Trim - Sill - Trunk (Remove and Replace).
5Remove the trunk garnish. See Garnish - Trunk (Remove and Replace).
6Release the clips that attach the puddle light to the RH trunk side trim, disconnect the electrical harness from the puddle light electrical connector, and then remove the puddle light from the vehicle.
7Remove the push clips that attach the RH trunk side trim to the body, and remove the side trim from the vehicle.

Install

Installation procedure is the reverse of removal.