Link - Compliance - Lower - Front - LH (Remove and Replace)

Correction code 3101360231013602

Remove

  1. Remove the LH front wheel arch liner. See Wheel Arch Liner - Front - LH (Remove and Replace).
  2. Remove the front aero shield panel. See Panel - Aero Shield - Front (Remove and Replace).
  3. Remove and discard the nut that attaches the front LH lower compliance link to the knuckle.
    Torque 180 Nm
  4. Remove the bolt and nut that attach the link to the front subframe, and then remove the link from the subframe and knuckle.
    Torque 115 Nm
    Torque 115 Nm
1Remove the LH front wheel arch liner. See Wheel Arch Liner - Front - LH (Remove and Replace).
2Remove the front aero shield panel. See Panel - Aero Shield - Front (Remove and Replace).
3Remove and discard the nut that attaches the front LH lower compliance link to the knuckle.
Torque 180 Nm
4Remove the bolt and nut that attach the link to the front subframe, and then remove the link from the subframe and knuckle.
Torque 115 Nm
Torque 115 Nm

Install

Installation procedure is the reverse of removal, except for the following: