Puddle Light - Front Door - LH (Remove and Replace)

Correction code 1735120217351202

Remove

  1. Use a small screwdriver or pry tool in the slot at the front of the puddle light to pry the light out of the bottom of the front LH door trim panel.
  2. Release the clips that attach the front of the puddle light to the bottom of the door trim panel, and then separate the light from the panel.
    Caution:
    Do not pull the puddle light too far from the door panel, as the puddle light connector is still attached.
  3. Disconnect the electrical wiring harness from the puddle light connector, and then remove the light from the vehicle.
1Use a small screwdriver or pry tool in the slot at the front of the puddle light to pry the light out of the bottom of the front LH door trim panel.
2Release the clips that attach the front of the puddle light to the bottom of the door trim panel, and then separate the light from the panel.
Caution:
Do not pull the puddle light too far from the door panel, as the puddle light connector is still attached.
3Disconnect the electrical wiring harness from the puddle light connector, and then remove the light from the vehicle.

Install

Installation procedure is the reverse of removal, except for the following:

Align the slot of the light toward the front of the vehicle.