Antenna - Wi-Fi (Remove and Replace)

Correction code 2133010221330102

Remove

  1. Remove the LH and RH side rail trims. See Trim - Side Rail - LH (Remove and Install).
  2. Open the LH and RH hook covers, and then release the clips that attach the screw covers to the LH and RH coat hooks.
  3. Remove the screws that attach the LH and RH rear coat hooks to the vehicle.
    Torque 2.5 Nm
  4. Release the clips that attach the LH and RH upper B-pillar trims to the vehicle, and then set the B-pillar trims aside. See Trim - B-Pillar - Upper - LH (Remove and Replace).
    Note: It is not necessary to completely remove the upper B-pillar trims from the vehicle. While still attached to the seatbelt, set the trim aside.
  5. Release the clips (4x) that attach the rear end of the headliner to the vehicle, and then insert up a rolled up rag between the headliner and body for additional clearance.
    Caution:
    Take care not to bend the headliner.
  6. Disconnect the electrical connector from the Wi-Fi antenna.
  7. Release the clips that attach the Wi-Fi antenna to the body, and then remove the antenna from the vehicle.
1Remove the LH and RH side rail trims. See Trim - Side Rail - LH (Remove and Install).
2Open the LH and RH hook covers, and then release the clips that attach the screw covers to the LH and RH coat hooks.
3Remove the screws that attach the LH and RH rear coat hooks to the vehicle.
Torque 2.5 Nm
4Release the clips that attach the LH and RH upper B-pillar trims to the vehicle, and then set the B-pillar trims aside. See Trim - B-Pillar - Upper - LH (Remove and Replace).
Note: It is not necessary to completely remove the upper B-pillar trims from the vehicle. While still attached to the seatbelt, set the trim aside.
5Release the clips (4x) that attach the rear end of the headliner to the vehicle, and then insert up a rolled up rag between the headliner and body for additional clearance.
Caution:
Take care not to bend the headliner.
6Disconnect the electrical connector from the Wi-Fi antenna.
7Release the clips that attach the Wi-Fi antenna to the body, and then remove the antenna from the vehicle.

Install

Installation procedure is the reverse of removal.