Bracket - 12V Battery (Dual Motor) (Remove and Replace)

Correction code 1701401217014012

Remove

  1. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  2. Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  3. Remove the cabin intake duct. See Duct - Cabin Intake (Remove and Replace).
  4. Remove the underhood storage unit. See Underhood Storage Unit (Remove and Replace).
  5. Remove the LH and RH wiper arms. See Wiper Arms (Remove and Replace).
  6. Remove the LH and RH shock tower covers. See Cover - Shock Tower - LH (Remove and Replace).
  7. Remove the cowl screen panel. See Panel - Cowl Screen (Remove and Replace).
  8. Disconnect 12V power. See 12V Power (Disconnect and Connect).
  9. Remove the 12V auxiliary battery. See Battery - 12V (Remove and Replace).
  10. Remove the front body controller module. See Module - Body Controller - Front (Dual Motor) (Remove and Replace).
  11. Release the clips that attach the coolant hoses and electrical harnesses to the 12V battery beam.
  12. Remove the bolts that attach the 12V battery beam to the vehicle.
    Torque 9 Nm
  13. Remove the 12V battery bracket and 12V battery beam from the vehicle.
    Note: Carefully slide the beam toward the RH side of the vehicle, and then lift the LH side of the beam to remove the assembly.
  14. Remove the bolts that attach the 12V battery beam to the 12V battery bracket, and then set the beam aside.
    Torque 9 Nm
1Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
2Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
3Remove the cabin intake duct. See Duct - Cabin Intake (Remove and Replace).
4Remove the underhood storage unit. See Underhood Storage Unit (Remove and Replace).
5Remove the LH and RH wiper arms. See Wiper Arms (Remove and Replace).
6Remove the LH and RH shock tower covers. See Cover - Shock Tower - LH (Remove and Replace).
7Remove the cowl screen panel. See Panel - Cowl Screen (Remove and Replace).
8Disconnect 12V power. See 12V Power (Disconnect and Connect).
9Remove the 12V auxiliary battery. See Battery - 12V (Remove and Replace).
10Remove the front body controller module. See Module - Body Controller - Front (Dual Motor) (Remove and Replace).
11Release the clips that attach the coolant hoses and electrical harnesses to the 12V battery beam.
12Remove the bolts that attach the 12V battery beam to the vehicle.
Torque 9 Nm
13Remove the 12V battery bracket and 12V battery beam from the vehicle.
Note: Carefully slide the beam toward the RH side of the vehicle, and then lift the LH side of the beam to remove the assembly.
14Remove the bolts that attach the 12V battery beam to the 12V battery bracket, and then set the beam aside.
Torque 9 Nm

Install

Installation procedure is the reverse of removal, except for the following:

  • Replace all nyloc nuts.
  • Replace all patchbolts.