Insert - Front Bin - Center Console (Remove and Replace)

Correction code 1519560215195602

Remove

  1. Remove the LH front floormat.
  2. Remove the center console. See Center Console (Remove and Install)
  3. Raise the center console armrest for access.
  4. Remove the LH and RH center console decor trim. See Decor Trim - Center Console (Remove and Replace).
  5. Remove the screws that attach the LH bright strip to the center console.
    Torque 1.6 Nm
  6. Release the 6 tabs that attach the bright strip to the center console, and then remove the bright strip.
  7. Remove the screws that attach the RH bright strip to the center console.
  8. Release the 6 tabs that attach the bright strip to the center console, and then remove the bright strip.
  9. Release the clips that attach the cup holder decor to the center console.
  10. Disconnect the electrical connector from security controller, and then remove the cup holder decor.
  11. Disconnect the connectors from the 12V outlet and the puddle light.
  12. Remove the screws that attach the cup holder assembly to the center console.
    Torque 1.1 Nm
  13. Release the clips that attach the cup holder assembly to the center console, and then remove the cup holder assembly from the center console.
  14. Disconnect the connectors from the RH side of the center console.
  15. Disconnect the connectors from the USB controller.
  16. Release the clips that attach the cables to the center console front bin insert.
  17. Remove the screws that attach the center console front bin insert to the center console.
    Torque 1.1 Nm
  18. Pull up to release the clips (x4) that attach the center console front bin insert to the center console, and then remove the bin.
1Remove the LH front floormat.
2Remove the center console. See Center Console (Remove and Install)
3Raise the center console armrest for access.
4Remove the LH and RH center console decor trim. See Decor Trim - Center Console (Remove and Replace).
5Remove the screws that attach the LH bright strip to the center console.
Torque 1.6 Nm
6Release the 6 tabs that attach the bright strip to the center console, and then remove the bright strip.
7Remove the screws that attach the RH bright strip to the center console.
8Release the 6 tabs that attach the bright strip to the center console, and then remove the bright strip.
9Release the clips that attach the cup holder decor to the center console.
10Disconnect the electrical connector from security controller, and then remove the cup holder decor.
11Disconnect the connectors from the 12V outlet and the puddle light.
12Remove the screws that attach the cup holder assembly to the center console.
Torque 1.1 Nm
13Release the clips that attach the cup holder assembly to the center console, and then remove the cup holder assembly from the center console.
14Disconnect the connectors from the RH side of the center console.
15Disconnect the connectors from the USB controller.
16Release the clips that attach the cables to the center console front bin insert.
17Remove the screws that attach the center console front bin insert to the center console.
Torque 1.1 Nm
18Pull up to release the clips (x4) that attach the center console front bin insert to the center console, and then remove the bin.

Install

Installation procedure is the reverse of removal.