SD Card - Car Computer (Remove and Replace)

Correction code 2115240221152402

Remove

  1. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  2. Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  3. Remove the cabin intake duct. See Duct - Cabin Intake (Remove and Replace)
  4. Disconnect 12V power. See 12V Power (Disconnect and Connect).
  5. Remove the underhood storage unit. See Underhood Storage Unit (Remove and Replace).
  6. Remove the Outer HVAC plenum duct. See Duct - HVAC Plenum - Outer (Remove and Replace)
  7. Remove the RH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
  8. Remove the RH center console side panel carpet. See Carpet - Side Panel - Center Console - LH (Remove and Replace).
  9. Remove the RH footwell duct. See Duct - Footwell - RH (Remove and Replace).
  10. Remove the car computer. See #GUID-122A40DB-2F41-432F-B59E-BF78921DEC16.
  11. Remove the car computer connectivity board. See Connectivity Board - Car Computer (Remove and Replace).
  12. Use a trim tool to slide the SD card retaining tab over, and then use plastic tweezers to remove the SD card from the computer.
1Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
2Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
3Remove the cabin intake duct. See Duct - Cabin Intake (Remove and Replace)
4Disconnect 12V power. See 12V Power (Disconnect and Connect).
5Remove the underhood storage unit. See Underhood Storage Unit (Remove and Replace).
6Remove the Outer HVAC plenum duct. See Duct - HVAC Plenum - Outer (Remove and Replace)
7Remove the RH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
8Remove the RH center console side panel carpet. See Carpet - Side Panel - Center Console - LH (Remove and Replace).
9Remove the RH footwell duct. See Duct - Footwell - RH (Remove and Replace).
10Remove the car computer. See #GUID-122A40DB-2F41-432F-B59E-BF78921DEC16.
11Remove the car computer connectivity board. See Connectivity Board - Car Computer (Remove and Replace).
12Use a trim tool to slide the SD card retaining tab over, and then use plastic tweezers to remove the SD card from the computer.

Install

Installation procedure is the reverse of removal.