Center Console (Remove and Install)

Correction code 1519010115190101

Remove

  1. Remove and attach the customer's belongings from the center console, if needed.
  2. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  3. Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  4. Remove the driver floormat.
  5. Remove the LH center console side panel carpet. See Carpet - Side Panel - Center Console - LH (Remove and Replace).
  6. Remove the bolts that attach the LH front of the center console to the body.
  7. Remove the front passenger floormat.
  8. Remove the RH center console side panel carpet. See Carpet - Side Panel - Center Console - LH (Remove and Replace).
  9. Remove the bolts that attach the RH front of the center console to the body.
  10. Disconnect the electrical connector that is located at the RH front of the center console.
  11. Remove the phone tray. See Phone Tray - Center Console (Remove and Replace).
  12. Remove the bolts that attach the front of the center console to the body.
  13. Remove the center console lower rear panel. See Panel - Lower Rear - Center Console (Remove and Replace).
  14. Remove the bolt that attaches the LH rear of the center console to the body.
  15. Remove the bolt that attaches the RH rear of the center console to the body.
  16. On the touchscreen, select Control > Safety & Security > Vehicle Power > Power Off to power off the vehicle.
  17. Disconnect 12V power. See 12V Power (Disconnect and Connect).
  18. Disconnect the electrical connector from the rear of the center console.
  19. Close the center console rotating lid to prevent it from getting stuck on the center display upon removal of the center console from the vehicle.
  20. With an assistant, remove the center console from the vehicle as follows:
    1. Tilt the rear of the center console upwards.
    2. Pull the center console towards the rear of the vehicle.
    3. Tilt the front of the center console upwards.
    4. Remove the center console through the passenger front door.
1Remove and attach the customer's belongings from the center console, if needed.
2Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
3Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
4Remove the driver floormat.
5Remove the LH center console side panel carpet. See Carpet - Side Panel - Center Console - LH (Remove and Replace).
6Remove the bolts that attach the LH front of the center console to the body.
7Remove the front passenger floormat.
8Remove the RH center console side panel carpet. See Carpet - Side Panel - Center Console - LH (Remove and Replace).
9Remove the bolts that attach the RH front of the center console to the body.
10Disconnect the electrical connector that is located at the RH front of the center console.
11Remove the phone tray. See Phone Tray - Center Console (Remove and Replace).
12Remove the bolts that attach the front of the center console to the body.
13Remove the center console lower rear panel. See Panel - Lower Rear - Center Console (Remove and Replace).
14Remove the bolt that attaches the LH rear of the center console to the body.
15Remove the bolt that attaches the RH rear of the center console to the body.
16On the touchscreen, select Control > Safety & Security > Vehicle Power > Power Off to power off the vehicle.
17Disconnect 12V power. See 12V Power (Disconnect and Connect).
18Disconnect the electrical connector from the rear of the center console.
19Close the center console rotating lid to prevent it from getting stuck on the center display upon removal of the center console from the vehicle.
20With an assistant, remove the center console from the vehicle as follows:
  1. Tilt the rear of the center console upwards.
  2. Pull the center console towards the rear of the vehicle.
  3. Tilt the front of the center console upwards.
  4. Remove the center console through the passenger front door.

Install

  1. With an assistant, install the center console into the vehicle as follows:
    1. Tilt the front of the center console downwards.
    2. Slide the center console towards the front of the vehicle.
    3. Tilt the rear of the center console downwards until it is in place.
  2. Open the center console rotating lid.
  3. Connect the electrical connector in the rear of the center console.
    Caution:
    Ensure the connector is properly installed. Perform a push-pull test before continuing this procedure.
  4. Install the bolt that attaches the RH rear of the center console to the body.
    Torque 7 Nm
  5. Install the bolt that attaches the LH rear of the center console to the body.
    Torque 7 Nm
  6. Install the center console lower rear panel. See Panel - Lower Rear - Center Console (Remove and Replace).
  7. Install the bolts that attach the front of the center console to the body.
    Torque 1.7 Nm
  8. Install the phone tray. See Phone Tray - Center Console (Remove and Replace).
  9. Connect the electrical connector that is located at the RH front of the center console.
    Caution:
    Ensure the connector is properly installed. Perform a push-pull test before continuing this procedure.
  10. Install the bolts that attach the RH front of the center console to the body.
    Torque 7 Nm
  11. Install the RH center console side panel carpet. See Carpet - Side Panel - Center Console - LH (Remove and Replace).
  12. Install the front passenger floormat.
  13. Install the bolts that attach the LH front of the center console to the body.
    Torque 7 Nm
  14. Install the LH center console side panel carpet. See Carpet - Side Panel - Center Console - LH (Remove and Replace).
  15. Install the driver floormat.
  16. Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  17. Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  18. Restore the customer's belongings into the center console, if needed.
1With an assistant, install the center console into the vehicle as follows:
  1. Tilt the front of the center console downwards.
  2. Slide the center console towards the front of the vehicle.
  3. Tilt the rear of the center console downwards until it is in place.
2Open the center console rotating lid.
3Connect the electrical connector in the rear of the center console.
Caution:
Ensure the connector is properly installed. Perform a push-pull test before continuing this procedure.
4Install the bolt that attaches the RH rear of the center console to the body.
Torque 7 Nm
5Install the bolt that attaches the LH rear of the center console to the body.
Torque 7 Nm
6Install the center console lower rear panel. See Panel - Lower Rear - Center Console (Remove and Replace).
7Install the bolts that attach the front of the center console to the body.
Torque 1.7 Nm
8Install the phone tray. See Phone Tray - Center Console (Remove and Replace).
9Connect the electrical connector that is located at the RH front of the center console.
Caution:
Ensure the connector is properly installed. Perform a push-pull test before continuing this procedure.
10Install the bolts that attach the RH front of the center console to the body.
Torque 7 Nm
11Install the RH center console side panel carpet. See Carpet - Side Panel - Center Console - LH (Remove and Replace).
12Install the front passenger floormat.
13Install the bolts that attach the LH front of the center console to the body.
Torque 7 Nm
14Install the LH center console side panel carpet. See Carpet - Side Panel - Center Console - LH (Remove and Replace).
15Install the driver floormat.
16Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
17Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
18Restore the customer's belongings into the center console, if needed.