Harness - Windshield (Remove and Replace)

Correction code 1710100117101001

Remove

  1. Remove the LH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace).
  2. Remove the LH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove and Replace).
  3. Remove the LH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
  4. Remove the LH upper A-pillar trim. See Trim - A-Pillar - Upper - LH (Remove and Replace).
  5. Remove the driver sun visor. See Sun Visor - Driver (Remove and Replace).
  6. Release the driver sun visor base cover clips, and then remove the base cover from the vehicle.
  7. Remove the bolt that attach the driver sun visor base to the body, and remove the base from the vehicle.
  8. Remove the lower quad camera cover. See Quad Camera Cover - Lower (Remove and Replace).
  9. Remove the rear view mirror. See Mirror - Rear View (Remove and Replace).
  10. Remove the forward facing camera. See Camera - Forward Facing (Remove and Replace).
  11. Repeat steps 1 through 7 on the RH side of the vehicle.
  12. Release the clips (x3) that attach the headliner by pulling downwards at the front center of the headliner.
  13. Disconnect the windshield harness electrical connectors, and then pull the windshield harness up through the opening on the instrument panel.
  14. Release the clips that attach the windshield harness to the RH A-pillar.
  15. Release the clips that attach the windshield harness along the top portion the windshield, and then remove the harness from the vehicle.
1Remove the LH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace).
2Remove the LH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove and Replace).
3Remove the LH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
4Remove the LH upper A-pillar trim. See Trim - A-Pillar - Upper - LH (Remove and Replace).
5Remove the driver sun visor. See Sun Visor - Driver (Remove and Replace).
6Release the driver sun visor base cover clips, and then remove the base cover from the vehicle.
7Remove the bolt that attach the driver sun visor base to the body, and remove the base from the vehicle.
8Remove the lower quad camera cover. See Quad Camera Cover - Lower (Remove and Replace).
9Remove the rear view mirror. See Mirror - Rear View (Remove and Replace).
10Remove the forward facing camera. See Camera - Forward Facing (Remove and Replace).
11Repeat steps 1 through 7 on the RH side of the vehicle.
12Release the clips (x3) that attach the headliner by pulling downwards at the front center of the headliner.
13Disconnect the windshield harness electrical connectors, and then pull the windshield harness up through the opening on the instrument panel.
14Release the clips that attach the windshield harness to the RH A-pillar.
15Release the clips that attach the windshield harness along the top portion the windshield, and then remove the harness from the vehicle.

Install

  1. Secure the clips that attach the windshield harness to the RH A-pillar.
  2. Connect the windshield harness electrical connectors.
  3. Install the forward facing camera. See Camera - Forward Facing (Remove and Replace).
  4. Secure the windshield harness with the clips along the top of the windshield.
  5. Install the clips (x3) that attach the front center of the headliner to the body.
  6. Install the bolt that attach the front passenger visor base to the body.
    Torque 3 Nm
    LH side shown, RH similar
  7. Install the front passenger sun visor base cover clips.
  8. Install the front passenger sun visor. See Sun Visor - Driver (Remove and Replace).
  9. Install the RH upper A-pillar trim. See Trim - A-Pillar - Upper - LH (Remove and Replace).
  10. Install the RH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
  11. Install the RH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove and Replace).
  12. Install the RH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace).
  13. Repeat steps 6 through 12 on the LH side of the vehicle.
  14. Perform the forward facing camera target calibration procedure. See Camera - Forward Facing (Target Calibration)
1Secure the clips that attach the windshield harness to the RH A-pillar.
2Connect the windshield harness electrical connectors.
3Install the forward facing camera. See Camera - Forward Facing (Remove and Replace).
4Secure the windshield harness with the clips along the top of the windshield.
5Install the clips (x3) that attach the front center of the headliner to the body.
LH side shown, RH similar
6Install the bolt that attach the front passenger visor base to the body.
Torque 3 Nm
7Install the front passenger sun visor base cover clips.
8Install the front passenger sun visor. See Sun Visor - Driver (Remove and Replace).
9Install the RH upper A-pillar trim. See Trim - A-Pillar - Upper - LH (Remove and Replace).
10Install the RH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
11Install the RH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove and Replace).
12Install the RH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace).
13Repeat steps 6 through 12 on the LH side of the vehicle.
14Perform the forward facing camera target calibration procedure. See Camera - Forward Facing (Target Calibration)