Fascia - Front (Remove and Replace)

Correction code 1001100210011002

Remove

  1. Remove the front license plate bracket. See Bracket - License Plate - Front (Remove and Replace).
  2. Remove the front fascia. See Fascia - Front (Remove and Install).
  3. Disconnect the electrical harness from the RH front turn signal/fog light connector.
  4. Release the clips that attach the electrical harness to the front turn signal/fog light.
  5. Remove the screws that attach the front turn signal/fog light to the front fascia.
  6. Use a trim tool to release the tabs (x4) that attach the front turn signal/fog light to the front fascia, and then remove the light from the front fascia.
  7. Repeat step 3 through step 5 for the LH front turn signal/fog light.
  8. Disconnect the electrical harness from all of the front parking distance sensors connectors (x6).
    LH Front Parking Assist Sensor Shown
  9. Release the clips that attach the parking distance sensors to the front fascia, and then remove the sensors (x6) from the fascia.
    LH Front Parking Assist Sensor Shown
  10. Disconnect the electrical harness from the ambient air temperature sensor connector.
  11. Release the clips that attach the electrical harness to the front fascia, and then remove the electrical harness from the fascia.
  12. Release the clips that attach the tow hook cover to the front fascia, and then remove the cover from the fascia.
  13. Remove the screws that attach the front fascia grille to the front fascia.
  14. Release the clips (x9) that attach the front fascia grille to the front fascia, and then remove grille from the fascia.
    Top
    Bottom
1Remove the front license plate bracket. See Bracket - License Plate - Front (Remove and Replace).
2Remove the front fascia. See Fascia - Front (Remove and Install).
3Disconnect the electrical harness from the RH front turn signal/fog light connector.
4Release the clips that attach the electrical harness to the front turn signal/fog light.
5Remove the screws that attach the front turn signal/fog light to the front fascia.
6Use a trim tool to release the tabs (x4) that attach the front turn signal/fog light to the front fascia, and then remove the light from the front fascia.
7Repeat step 3 through step 5 for the LH front turn signal/fog light.
LH Front Parking Assist Sensor Shown
8Disconnect the electrical harness from all of the front parking distance sensors connectors (x6).
LH Front Parking Assist Sensor Shown
9Release the clips that attach the parking distance sensors to the front fascia, and then remove the sensors (x6) from the fascia.
10Disconnect the electrical harness from the ambient air temperature sensor connector.
11Release the clips that attach the electrical harness to the front fascia, and then remove the electrical harness from the fascia.
12Release the clips that attach the tow hook cover to the front fascia, and then remove the cover from the fascia.
13Remove the screws that attach the front fascia grille to the front fascia.
Top
Bottom
14Release the clips (x9) that attach the front fascia grille to the front fascia, and then remove grille from the fascia.

Install

Installation procedure is the reverse of removal.

  1. Install the front fascia grille onto the front fascia, and then fasten the clips (x9) that attach the grille to the fascia.
    Top
    Bottom
  2. Install the screws that attach the front fascia grille to the front fascia.
    Torque 1.8 Nm
  3. Install the tow hook cover to the front fascia, and then fasten the clips that attach the cover to the fascia.
  4. Install the electrical harness to the front fascia, and then fasten the clips that attach the electrical harness to the fascia.
  5. Connect the electrical harness to the ambient air temperature sensor connector.
  6. Install the parking distance sensors (x6) to the front fascia, and then fasten the clips that attach the sensors to the fascia.
    LH Front Parking Assist Sensor Shown
  7. Connect the electrical harness to all of the front parking distance sensors connectors (x6).
    LH Front Parking Assist Sensor Shown
  8. Install the front turn signal/fog light to the front fascia, and then fasten the tabs (x4) that attach the light to the fascia.
  9. Install the screws that attach the front turn signal/fog light to the front fascia.
    Torque 2.8 Nm
  10. Fasten the clips that attach the electrical harness to the front turn signal/fog light.
  11. Connect the electrical harness to the RH front turn signal/fog light connector.
  12. Install the front fascia. See Fascia - Front (Remove and Install).
  13. Install the front license plate bracket. See Bracket - License Plate - Front (Remove and Replace).
Top
Bottom
1Install the front fascia grille onto the front fascia, and then fasten the clips (x9) that attach the grille to the fascia.
2Install the screws that attach the front fascia grille to the front fascia.
Torque 1.8 Nm
3Install the tow hook cover to the front fascia, and then fasten the clips that attach the cover to the fascia.
4Install the electrical harness to the front fascia, and then fasten the clips that attach the electrical harness to the fascia.
5Connect the electrical harness to the ambient air temperature sensor connector.
LH Front Parking Assist Sensor Shown
6Install the parking distance sensors (x6) to the front fascia, and then fasten the clips that attach the sensors to the fascia.
LH Front Parking Assist Sensor Shown
7Connect the electrical harness to all of the front parking distance sensors connectors (x6).
8Install the front turn signal/fog light to the front fascia, and then fasten the tabs (x4) that attach the light to the fascia.
9Install the screws that attach the front turn signal/fog light to the front fascia.
Torque 2.8 Nm
10Fasten the clips that attach the electrical harness to the front turn signal/fog light.
11Connect the electrical harness to the RH front turn signal/fog light connector.
12Install the front fascia. See Fascia - Front (Remove and Install).
13Install the front license plate bracket. See Bracket - License Plate - Front (Remove and Replace).