Antenna - GPS (Remove and Replace)

Correction code 2132010221320102

Remove

  1. Remove the forward facing camera. See Camera - Forward Facing (Remove and Replace).
  2. Disconnect the electrical harness from the humidity and temperature sensor connector.
  3. Disconnect the electrical harness from the GPS antenna connector.
  4. Remove the screw that attaches the electrical harness to the windshield bracket, and then move the electrical harness aside.
    Torque 1 Nm
  5. Remove the screw that attaches the GPS antenna to the bracket, and then remove the GPS antenna from the vehicle.
    Torque 1 Nm
1Remove the forward facing camera. See Camera - Forward Facing (Remove and Replace).
2Disconnect the electrical harness from the humidity and temperature sensor connector.
3Disconnect the electrical harness from the GPS antenna connector.
4Remove the screw that attaches the electrical harness to the windshield bracket, and then move the electrical harness aside.
Torque 1 Nm
5Remove the screw that attaches the GPS antenna to the bracket, and then remove the GPS antenna from the vehicle.
Torque 1 Nm

Install

Installation procedure is the reverse of removal, except for the following:

After the installation of the new GPS antenna, perform the forward facing camera target calibration. See Camera - Forward Facing (Target Calibration).