Oil Screen - Front Drive Unit (Remove and Replace)

Correction code 3930500239305002
  • 1134264-00-AKIT, DRIVE UNIT OIL DRAIN, MODEL 3
  • 1139126-00-AKIT, DRIVE UNIT OIL FILL, MODEL 3
  • 1446276-20-A Tool, DUF Dipstick, Model 3
  • 1131264-00-ASWITCHBOX, OIL PUMP, MODEL 3
  • 1129348-00-A JUMP START, XP-10
  • 1130484-00-A Skt, Oil Filter, 63.5mm X 14
  • 1140378-00-A Tool, Oil Pump Screen Removal, Model 3

SPECIAL TOOLS

KIT, DRIVE UNIT OIL DRAIN, MODEL 3 (1134264-00-A)
KIT, DRIVE UNIT OIL FILL, MODEL 3 (1139126-00-A)
Tool, DUF Dipstick, Model 3 (1446276-20-A)
SWITCHBOX, OIL PUMP, MODEL 3 (1131264-00-A)
JUMP START, XP-10 (1129348-00-A )
Skt, Oil Filter, 63.5mm X 14 (1130484-00-A)
Tool, Oil Pump Screen Removal, Model 3 (1140378-00-A)

Remove

  1. Remove the front aero shield panel. See Panel - Aero Shield - Front (Remove and Replace).
  2. Remove the front drive unit oil pump. See Oil Pump - Front Drive Unit (Remove and Replace).
  3. Remove and discard the o-rings from the front drive unit oil pump.
  4. Remove the front drive unit oil screen from the front drive unit.
1Remove the front aero shield panel. See Panel - Aero Shield - Front (Remove and Replace).
2Remove the front drive unit oil pump. See Oil Pump - Front Drive Unit (Remove and Replace).
3Remove and discard the o-rings from the front drive unit oil pump.
4Remove the front drive unit oil screen from the front drive unit.

Install

Installation procedure is the reverse of removal, except for the following:

  • Lubricate the front drive unit oil screen o-rings with ATF-9.
  • Install new o-rings (part numbers 1108210-00-A, 1108211-00-A, and 1108214-00-A) on the front drive unit oil pump and lubricate the o-rings with ATF-9.