Seat Cushion Cover — Front

Removal

NOTE: For parts identification and location, refer to Seat — Exploded View, Front in this section.

1. Remove the seat backrest. For additional information, refer to Seat Backrest — Front in this section.

2. Release all seat cushion cover fasteners from the cushion frame.

3. NOTICE: Use care when separating the seat cushion cover from the hook-and-loop strips. The hook-and-loop strips may be torn from the foam pad.

   Remove all the hog rings and cushion cover.

Installation

1. Position the cushion cover to the foam pad and install 2 hog rings at each location.

2. Fasten all the cushion cover retainers to the cushion frame.

3. Install the seat backrest. For additional information, refer to Seat Backrest — Front in this section.